With the development of intelligent industrial automation, higher requirements are placed on the quality and efficiency of product screw locking; the locking process is digitized, intelligent, and standardized from the original uncertainties such as personal feelings and experience to the current implementation of the locking process. In order to meet the growing demand for intelligent screw locking in smart factories, the company's hand-held smart electric screwdrivers are widely used in applications that require high torque, real-time display tightening and prevent workers from slipping.
Features:
This series of products use high-precision imported motor and American original high-performance chip to make the physical hardware system highly reliable. It is equipped with high-torque control algorithm developed by our R&D team to ensure the torque accuracy and smooth system operation.
(1) Torque control with an accuracy of ±5%. (International General Standard)
(2) Anti-static design, the driver head keeps conducting with the outside in both rotation and rest.
(3) Support 8 tightening tasks and support 16 tasks.
(4) The tightening record can be saved, traceable, and stored for 7 days to tighten the record. (You can also link the pc to access the computer disk)
(5) The tightening result is displayed in real time, so that the result of each screw is displayed in front of the worker.
(6) The anti-leakage function allows the worker to find the screw that is missing and promptly replenish it.
(7) A variety of prompts, let the workers focus on the screws and the position, the sound can be discerned and tightened.
Main performance parameters:
The system supports 8 task settings, each task can be divided into 5 tightening steps, 2 loosening steps, and 1 direction free rotation.A locking process can be divided into three stages: tooth insertion, screwing in and tightening. The control of three different stages is realized by setting the parameters of each step.
(1) Parameter description
Tightening mode: Supports 2 modes, 0--automatic mode
2--High speed mode (for self-tapping screws) Tighten the direction of rotation: (with the head facing up as a reference) 0-cw (timely); 1-ccw (counterclockwise); Target torque: set the final target torque of the lock screw The value of the value; the torque holding time: the time to maintain the target torque after the torque reaches the target value;
Torque compensation value: When setting the target torque and the actual torque to have a fixed deviation, set this parameter plus a value or subtract a value; when setting this parameter, first set a slightly larger value (such as: 10 or -10) ), then look at the tactometer's measured feedback effect and further fine-tune the settings.
Torque test-free laps: The tightening result is not judged within the set number of turns, reducing false alarms caused by excessive torque fluctuations during the initial tightening phase.
High-sliding tooth detection: 0=OFF; 1=ON. (Default off for debugging; recommended for actual use) When this function is enabled, "-Floating height defines the number of turns" and "+ sliding teeth defines the number of turns "Two parameters are valid; if not, the tightening result is only ok, ng, three states are not completed; the float height and the slippery teeth are not checked.
Features:
This series of products use high-precision imported motor and American original high-performance chip to make the physical hardware system highly reliable. It is equipped with high-torque control algorithm developed by our R&D team to ensure the torque accuracy and smooth system operation.
(1) Torque control with an accuracy of ±5%. (International General Standard)
(2) Anti-static design, the driver head keeps conducting with the outside in both rotation and rest.
(3) Support 8 tightening tasks and support 16 tasks.
(4) The tightening record can be saved, traceable, and stored for 7 days to tighten the record. (You can also link the pc to access the computer disk)
(5) The tightening result is displayed in real time, so that the result of each screw is displayed in front of the worker.
(6) The anti-leakage function allows the worker to find the screw that is missing and promptly replenish it.
(7) A variety of prompts, let the workers focus on the screws and the position, the sound can be discerned and tightened.
Main performance parameters:
| hl type | ||
| Input voltage: ac220v | Rated power: 50w | |
| Torque range: 0.3 Kgf.cm~1.8Kgf.cm or 30mN.m~180mN.m | Torque accuracy: ±5% | |
| Automatic mode speed: 30rpm~1200rpm | High speed mode speed: 30rpm~1800rpm | |
| hxl type | ||
| Input voltage: ac220v | Rated power: 100w | |
| Torque range: 1.8 Kgf.cm~8.0 Kgf.cm or 180 mN.m~800mN.m | Torque accuracy: ±5% | |
| Automatic mode speed: 30rpm~1000rpm | High speed mode speed: 30rpm~1200rpm | |
(1) Parameter description
Tightening mode: Supports 2 modes, 0--automatic mode
2--High speed mode (for self-tapping screws) Tighten the direction of rotation: (with the head facing up as a reference) 0-cw (timely); 1-ccw (counterclockwise); Target torque: set the final target torque of the lock screw The value of the value; the torque holding time: the time to maintain the target torque after the torque reaches the target value;
Torque compensation value: When setting the target torque and the actual torque to have a fixed deviation, set this parameter plus a value or subtract a value; when setting this parameter, first set a slightly larger value (such as: 10 or -10) ), then look at the tactometer's measured feedback effect and further fine-tune the settings.
Torque test-free laps: The tightening result is not judged within the set number of turns, reducing false alarms caused by excessive torque fluctuations during the initial tightening phase.
High-sliding tooth detection: 0=OFF; 1=ON. (Default off for debugging; recommended for actual use) When this function is enabled, "-Floating height defines the number of turns" and "+ sliding teeth defines the number of turns "Two parameters are valid; if not, the tightening result is only ok, ng, three states are not completed; the float height and the slippery teeth are not checked.